Dub Central
About Us
Cascade Microphones V57/M39 Pair Bundle - Black/Gold


The Cascade V57 offer a 1.07" gold plated capsule and is a transformerless design. This microphone is suitable for most studio applications and is an exception value for project and pro studios alike. The frequency response is somewhat flat with a bump between 10-20k. The microphone includes a -10dB Pad and a 150Hz low-cut switch on the back-side of the microphone. Extensive detail has been taken to assure that the audio quality and exterior finish meets the highest standards.
Cascade V57 Features
- Large capsule with gold-plated membrane
- Ultra low-noise transformerless design
- Cardioid polar pattern
- True condenser (externally biased)
- Full frequency response
Cascade V57 Specifications
- Capsule: 1.07" gold-sputtered, Pressure Gradient Transducer
- Pattern: Cardioid
- Frequency Response: 20Hz – 20kHz
- FET preamp
- Output: Transformerless
- Attenuator: -10dB Pad switch
- High pass filter:150Hz low-cut switch @ 6dB per octave
- Impedance: 150ohms
- Sensitivity: 15mv/Pa
- Max SPL: 137dB
- Signal to Noise Ratio:74dB (Ref. 1Pa A-weighted per IEC268-15)
- Equivalent Noise Level: 15dB (A weighted IEC 268-4)
- Power Requirements: 48V Phantom Power (+- 4V)
- Size: 60mm x 160mm
- Weight: 540g
- Supplied with suspension shockmount
- Includes EVA lined custom carrying case
The Cascade M39 is a cardioid condenser that has a 22mm diameter diaphragm. The M39 has a silky, open audio quality with a wide dynamic range essential for accurate, instrument recording and is ideal for use as drum over heads, hi-hat, snare, or acoustic instruments such as guitar and piano. The M39 features a high SPL rating of 137 dB and is capable of capturing even the loudest of audio sources. The M39 is a compact microphone that is great for recording a wide range of instruments and is in use in professional and project studios around the world.
Cascade M39 Specifications
22mm diameter diaphragm
Power: P24V or P48V Phantom Power
10dB switchable attenuation, selectable
-10dB low-frequency roll-off
Phasing: Positive pressure on diaphragm generates a positive voltage on pin #2 relative to pin #3
Generating Element: Externally Biased Condenser
Polar Pattern: Unidirectional (Cardioid)
Frequency Response: 30 Hz – 20 kHz
Sensitivity: -56 dB 0dB=1V/uBar @ 1 kHz
Impedance: Low (Less than 200 Ohms)
Equivalent Noise Level: +14 dB (A-weighted)
Connector: 3-Pin male XLR
Weight: 135 Grams
Model: SCASV57M39BG

